Behran Oil Products

USES

• Solvent for lube refineries & decolorizing agent
• Reactive solvent and good wetting agent (furfural is unusually effective as a solvent for phenolic resins)
• Unique chemical feedstock for furfuryl alcohol and other Furan derivatives
• Maleic anhydride feed
• in production of synthetic polymers, like Butadiene Rubber and Piastics

PROPERTIES

Furfural (C5H4O2) is an aromatic aldehyde, which is produced from agricultural by product, particularly "bagass".

Technical Furfural is a liquid of light-yellow color with almonds distinctive oder. it has large reactivity and forms various derivatives easily. Furfural easily dissolve in Alcohol, Benzene and Chloroform etc. This product slightly dissolve in water. Furfural decomposes into furan and carbon monoxide ehrn heated above 250°C. Furfural irreversibly solidifies into a hard thermosetting resin when heated in presence of acids.

More...

Foots oil or residue wax, is a by product obtained by slack wax deoiling or sweating in the paraffin wax manufacturing process. it is used in textile, leather and rubber industries, as well as petroleum jelly and white oil manufacturing.

More...

More...

Slack wax, a mixture of oil and wax is a by product of the base oil refinery process, which server as a feed stock and that is further refined to produce paraffin wax.

Behran Slack Wax can be used as blending components or water proofing agent in the manufacture of various industrial products such as candles, canvass coatings and composite wood panels.

These waxes can also function as controlled release agents for various chemicals and fertilizers.

More...

More...

Solvent Neutral Mineral base oils are prepared from crude oil derivatives according to the following processes.

• Distillation, to adjust the viscosity and flash point;
• Refining, to improve viscosity-temperature characteristics e.g. viscosity index (solvent extracton with furfural);
• Dewaxing, to improve the low temperature properties (M.E.K dewaxing);
• Hydrofinishing, to remove undesirable impurities from petroleum distillates (such as sulfur and nitrogen compounds and olefins).

Base Stocks, obtained after above listed operations are called Solvent Neutral Base Oil (SN) which are distinguished with numbers according to their approximate SUS viscosity at 40°C such as SN 90, SN150, SN350, SN500 etc.

In the Behran's modernized refinery plant, we use Lube-cut obtained from domestic petroleum oil refineries, to produce virgin mineral base oils Base oil Group l. Hight quality low oil paraffin waxes are also produced by "sweating process" which is in compliance with the environmental health care.

More...

More...

Process Oils for Rubbers, Elastomers and Adhesives

USES

• it is known that the modem rubber compounding process requires high speed mixing and short mixing and short mixing periods with proper polymer consistency for rapid processing.
• The function of behran rubber Process Oils is to improve physical properties of vulcanization to reduce the cost of the finished rubber compounds.

PROPERTIES

• Behran Rubber Process Oil are intermediate products with excellent processability, loading (filler) characteristics and tensile properties.
• Behran Rubber Process Oil are perfect intermediate products to optimize required conditions. The compounder can achieve a workable mass with adequate dispersion of fillers through the selection of the correct process oils.
• Behran Rubber Process Oil are efficient secondary plasticizers in order to reduce cost.
• Behran Rubber Process Oil are offered in two kinds: Aromatic and Paraffinic.

More...

USES

Behran TDAE (Treated Distillate Aromatic Extract) is a non carcinogenic mineral oil, used as aromatic process oils for the manufacture of oil extended natural or synthetic rubber and tire compounds.

PROPERTIES

• Good abrasion resistance
• Good low temperature flexibility
• Low amounts of waste tires in the process
• Good resistance to reversion
• Save fuel and energy consumption
• Extend tires life time
• Low environmental impact

More...